RailBlazers® Aluminum Railing

For typical single-family detached houses, Peak has determined appropriate fasteners for the attachment of the post base to certain wood or concrete structures. For further information visit the compliance section on this site at

For commercial use including multi-residential housing, please call Peak Customer Service at 1-877-883-PEAK (7325) or email:

Hacksaw or metal cutting saw, drill, drill bits, Phillips screw driver, safety glasses, measuring tape, liquid soap (for glass panel installations) and non-corrosive exterior caulking.

RailBlazers® is currently offered in 42" height to suit the majority of applications.

RailBlazers® is available in both black and white.

No, for safety reasons, only pickets can be used for stair railing applications.

Make sure you have removed the "picket gaskets" and have inserted the "glass gaskets". It is important to use liquid soap and water on both the glass gaskets and the top and bottom of the glass panel to help slide the glass panels into the glass gaskets. Always use two people to install glass panels. During installation, handle glass from the sides, not the bottom. Insert the glass panel completely inside the handrail gasket first and then lower into the base rail gasket. Ensure that the glass panel is completely seated in the base rail gasket. Rinse off soap.

Glass panels are available between 18 and 66 inches, in 3 inch increments via special order through your local Home Depot Canada stores. Home Depot Canada stores stock 42″ and 66″ panels in their stores. Please see our components section for a complete list of sizes

Yes, the tinted option is available in 6" panels.

Yes, RailBlazers® glass is fully tempered safety glass. RailBlazers® glass is identified by a small PEAK logo etched into the bottom corner of each glass panel. Each North American standard that the glass panels meet is etched into the bottom corner of each glass panel. Always comply with all applicable building codes.

Yes, your imagination is the only limit. You can even use decorative spacers in the same section as a glass panel and pickets. Be sure to use the correct gaskets for each (picket or glass).

Standard pickets: 16mm x 16mm x 950mm (L x W x H)
Wide pickets: 38.1mm x 16mm x 950mm (L x W x H)
Posts: 50.8mm x 50.8mm x 955mm (L x W x H)

Yes, it is a complete gate kit with all required fasteners and hardware included.

No, all fasteners are included with the posts or brackets; however, one base rail support is included with each hand & base rail.

No, they are different. Standard stair pickets are shorter than regular pickets, and wide stair pickets are cut on an angle. Stair spacers are longer than regular spacers and have angles cut at each end.

Glass gaskets are available in 6' lengths. Each 6' set contains one handrail glass gasket (larger of the two gaskets) and one base rail glass gasket (smaller of the two gaskets).

The heads of all fasteners provided with RailBlazers® are powder coated to match the color of the product.

The RailBlazers® system is coated with a durable and attractive powder coat finish. In the event your RailBlazers® is scratched, visit your local home improvement retailer and speak to a paint expert for suggestions on the best touch up solution.

We currently offer the diamond decorative spacers (black or white). These decorative spacers can be used in every space between the pickets, every other space or wherever you think looks best. Your imagination is the only limit!

The RailBlazers® gate fits up to a 46” rough opening without any alterations. RailBlazers® gates feature a removable post on one end that allows you to cut the gate down to the size you need. Simply remove the post, mark and cut the gate according to the installation instructions, reattach the removable post and secure with the self-drilling fasteners provided.

RailBlazers® Aluminum Railing is carried at all Home Depot Canada stores nationally. For more information, call Peak customer service at 1 (877) 883 - PEAK (7325).

Yes, RailBlazers® quality allows us to offer you a 20 year limited warranty.

Aluminum delivers the best combination of appearance, strength, and durability. Easy to assemble, and low maintenance, the powder coated finish will continue to retain its beauty for many years and is backed by a manufacturer's 20 year limited warranty. For a more detailed analysis, check out this article.

Our gates come with a latch and retainer mechanism that keeps the gate closed.

Our gates do not come with a locking mechanism at this time.

Our gates are available with wide or narrow pickets only.

Our gates are available in black or white, with wide or narrow pickets and fit a 46" opening. They can be cut down to fit smaller openings as necessary.

The process of fascia mount bracket installation results in the top of the bracket sitting flush with your deck surface, so the height of your railing system isn’t jeopardized.

Our fascia mount brackets allow you to mount our railings to your deck fascia and therefore no penetration of the deck surface is necessary.  As an added bonus, they also provide a few extra inches of deck space.

Our fascia mount brackets come with a base rail support bracket which attaches to the fascia itself.

If you prefer that your railing connect directly to a wall instead of a post, you can use our wall mount brackets for this purpose. Our wall mount brackets are secured to existing surfaces using lag bolts, and then your railing secures to the wall mount bracket with self-drilling screws.

To achieve angles other than 90 degrees, our universal connector can be configured to swivel horizontally or vertically (for stair applications).

We recommend using 2”x8” blocking directly under the location of your posts to provide more stability.

Our post column measures 2"x2" and the base measures 4"x4".

Our posts come in a standard height of 42”.

Building code requires no more than 4” of space between any two points.

Our glass panels are fully tempered and therefore are not able to be cut.

Our 6” glass panel kits come with a full accessory kit that includes gaskets and spacers.  Our large single glass panels (18” – 66”) require a glass gasket which is sold separately.

At this time, all of our glass panels only come in a standard height of 36 5/16” high.

We do not have a glass infill option for stairs. Our narrow or wide pickets provide the infill solution for staircases.

At this time our large glass panels are only available in a clear variety. For a tinted option, we do offer 6” glass panels that come tinted.

Each 6” glass panel kit comes with 7 panels, 14 glass gasket assemblies. Each kit also comes with 16 white and 16 black spacers. This allows each kit to work with either white or black railing.

Our stair spacers are 4.5”, and are cut on opposing angles. Our regular spacers are 3-15/16”.

Our decorative spacers measure 3-15/16”, and come in packs of four.

Our pickets are 36” high.

Each standard picket measures 5/8” X 5/8”, and our wide pickets are 5/8” X 1.5”

Single pickets are no longer available at The Home Depot. However, if you are in need of  extra pickets, please contact our friendly customer service team toll-free at 1-877-883-7325 or email Thank you!

Our spacers are available through special order at Home Depot.

Our hand & base rails are available in 4 ft. and 6 ft. lengths. We do not offer hand & base rails in 8 ft. lengths.

Our base rail supports are 1.5” wide and 2 5/8” tall, and we provide one per each length of 4’ or 6’ railing

We recommend using a soft cloth with warm soapy water, followed by rinsing thoroughly.

We do not recommend painting it, as this hasn’t been tested and could affect your warranty.

The base rail sits 2-7/16” off the ground to the bottom of the base rail once assembled.

A mitre saw with a non-ferrous blade is best.

In the uncommon situation where a component of our aluminum railing system is missing or defective, we encourage the customer to contact us directly via email at, or telephone at 604-448-8000. We stand by our products and make customer satisfaction our highest priority.

Yes, you can use our railing system on composite decking.

Our fasteners that come with our aluminum railing products are stainless steel.

Yes. For concrete installation, we recommend “tapcon” screws, “redhead” screws, or anchor bolts. The anchoring screws that come with Peak Aluminum Railing are intended for use on certain wood applications only, so you would need to purchase these concrete fasteners separately. All of these concrete fasteners should be readily available through your local Home Depot. We recommend that you consult with a local engineer to ensure the fasteners you select will provide the necessary strength to meet your local building codes.

Our railing system was designed for use as a guardrail, however we manufacture an aluminum fencing system that might better suit your needs.

The powder coating that is used on our railing system has been designed to withstand approximately 3,000 hours of continuous salt spray.

Our aluminum railing system is powder coated to protect against the effects of ACQ treated lumber.

Can't find the answer to your question? We're here to help!

If you have any questions feel free to email us at
or call one of our service representatives at 1 (877) 883 7325

easy-to-install, looks great and exclusive to The Home Depot!


The wonderful thing about the RailBlazers® Aluminum Railing System is that it’s extremely easy to install. In these installation videos one of our very own Peak pros will walk you through the installation process step-by-step, from beginning to end.

Were you unable to find what you were looking for?

Stay connected and subscribe for the latest railing updates and deals!